Hello All,
We are going to have one migration of our machine/server, details are given below.
Migration of storage LUNs(EMC to Hitachi)--almost 60 LUNs
OS is --HPUX11.23
Activity type-offline.
System is part of a two node cluster.HP service guard.
Now what are the exact steps & necessary precaution we need to take care.
regards
Arup
Hi all,
Next hurdle with my sudo configuration...seem to have a memory fault shwon below when running sudo
I haven't increased swap space yet...only because I'm thinking this is a 128GB machine (rx2800 i4) with nothing running on it yet. So I'm suspecting some kernel tuning would do the trick.
Message and swapinfo shown below. As always any input is greatly appreciated and welcomed.
Thanks
Mauro
Pid 10711 received a SIGSEGV for stack growth failure.
Possible causes: insufficient memory or swap space,
or stack size exceeded maxrsessiz
or stack size limit is set too small.
Memory fault
# swapinfo -tam
Mb Mb Mb PCT START/ Mb
TYPE AVAIL USED FREE USED LIMIT RESERVE PRI
NAME
dev 8192 0 8192 0% 0 - 1
/dev/vg00/lvol2
reserve - 554 -554
memory 124552 11687 112865 9%
total 132744 12241 120503 9% - 0 -
hi
need help badly...
my system got corrupted and i am trying to recover...
i know there is no way i can boot fro tape..
but how can i boot into single user mode?
i have hpux 11.23 o/s.
thanks very much!
ann
P.S. this thread has been moved from Workstations - Itanium-Based, hp9000, Visualize to HP-UX > sysadmin. - Hp Forum Moderator
I am not getting errors in /var/adm/syslog/syslog.log for all of my servers. For some reason the cf.hourly is not running, the cf.daily is still running. I have lost communication between my systems for part of the stuff i push out. Here is the error message.
cfservd[9639]: Private decrypt failed = padding check failed
May 20 17:00:30 khepx007 cfservd[9639]: From (host=test.test.com,user=root,ip=::ffff:172.26.104.163)
I am running DSAUtilities C.01.00.22 on hpux 1403
any help or direction would be appreciated.
thanks
Hi,
For Example , if my cron service is stopped on server , i want mail alert for same in my mailbox
can anyone help me with how to configure the same
P.S. This thread has been moved from General to HP-UX > sysadmin. - Hp Forum Moderator
Hi Bill ,
Its an excellent script.
But somehow its not running for one of my process .
ps -ef |grep -i str F0004
test 28899 1 0 13:31:02 pts/3 0:00 str F0004
rte 28254 1 0 May 21 ? 0:01 str F0004
dfr 3509 16295 1 15:58:12 pts/0 0:00 grep -i F0004
ddk17349 1 0 May 21 ? 0:04 str F0004
when am mentioning ;
ProcMon=1
PROCS=F0004:1:2
Where do i put second argument "str" ??
root#swapinfo -tam
Mb Mb Mb PCT START/ Mb
TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME
dev 4096 0 4096 0% 0 - 1 /dev/vg00/lvol2
dev 32768 0 32768 0% 0 - 1 /dev/vgswap/swap2
dev 32768 0 32768 0% 0 - 1 /dev/vgswap/swap3
dev 32768 0 32768 0% 0 - 1 /dev/vgswap/swap4
dev 32768 0 32768 0% 0 - 1 /dev/vgswap/swap5
dev 32768 0 32768 0% 0 - 1 /dev/vgswap/swap6
dev 32768 0 32768 0% 0 - 1 /dev/vgswap/swap7
dev 32768 0 32768 0% 0 - 1 /dev/vgswap/swap8
reserve - 107522 -107522
memory 186837 14544 172293 8%
total 420309 122066 298243 29% - 0 -
root#crashconf -v
Crash dump configuration has been changed since boot.
CLASS PAGES INCLUDED IN DUMP DESCRIPTION
-------- ---------- ---------------- -------------------------------------
UNUSED 23990520 no, by default unused pages
USERPG 20326707 no, by default user process pages
BCACHE 115193 no, by default buffer cache pages
KCODE 11640 no, by default kernel code pages
USTACK 76492 yes, by default user process stacks
FSDATA 38 yes, by default file system metadata
KDDATA 4964344 yes, by default kernel dynamic data
KSDATA 10267 yes, by default kernel static data
SUPERPG 791371 no, by default unused kernel super pages
Total pages on system: 50286572
Total pages included in dump: 5051141
Dump compressed: OFF
Dump Parallel: OFF
DEVICE OFFSET(kB) SIZE (kB) LOGICAL VOL. NAME
------------ ------------ ------------ ------------ -------------------------
1:0x000005 2612064 4194304 64:0x000002 /dev/vg00/lvol2
------------
4194304
Dump device configuration mode is config_deprecated_mode.
Use crashconf -s option to change the mode.
Physical Memory :
Model: ia64 hp Integrity BL870c i2
Main Memory: 196431 MB
Processors: 16
Currently our dump device is less then, as per physical memory. Due to which, in event of server crash, crash dump is not having enough dump space to store the crash.
Mine question is , Is it possible to use existing swap device as dump device. If yes How?
OS is HP-Unix 11i v3, We had swapoff utility installed in case we need to disable swap.
Hello,
On B2600 station we got error
INIT: command respawning too rapidly
id: OS "/products/components/os/bin/dcstartup # OS invocation
NO changes were till error got on screen, NO hardware change were made
Any Ideas ?
Thanks
Deividas Ceinoris
Hi Folks,
I need help in finding commands on HP-UX as a non-root user to find physical memory used which can match the value shown by glance.
The swapinfo only talks about the swap usage and command like dsmeg needs root access.
If anyone has come across other command for Memory usage please help me out.
Thanks,
Chai
Hello Folks,
We have a server with HP-UX (HP-UX favc B.11.11 U 9000/800 146404690 unlimited-user license) that is used as a bridge to another server. It is very old.
this server operates as the following way:
I'd like to replicate this configuration in another server, but I cannot find the way to do this.
I've checked the '/etc/profile' file and the '.profile' for every user but I cannot find any reference to the telnet's behaviour.
Please point me to the right direction. Thanks for your time.
Greetings
Issue with smh on an Integrity rx6600 server running HPUX BOE 11.31.1209
SMH does not work correctly. For example, If you go info smh>Accounts for users>Users, the following error occurs:
""The SAM file registration database, /etc/sam/reg_files.db, either is missing, cannot be opened, or is empty. This is usually caused by running SAM on a system that is not configured to run SAM. If this is the case, please use swconfig(1M) to configure the "SystemAdmin.SAM" fileset. Command Unsuccessful""
Yet this fileset is configured (did a swconfig anyway with no joy):
* Configured SystemAdmin.OBAM-RUN,l=/,r=B.11.31
* Configured SystemAdmin.SAM,l=/,r=B.11.31
NOTE: Volatile file "/etc/sam/reg_tm.db" missing.
If you match the /etc/sam directory to that from a similar server, there are three files issues
-r--r--r-- 1 bin bin 0 Oct 19 2012 reg_files.db # well, file is present but 0 size
-r--r--r-- 1 bin bin 229 Nov 30 2012 reg_dirs.db # file not present
-r--r--r-- 1 bin bin 35903 Nov 30 2012 reg_tm.db # file not present
I have no clues as to how long smh has been like this on this server. Anyone any idears how you get these 'db' files back?
Thanks
When I run sftp, I get no output whatsoever, not even an error message. How do i diagnose this? hp-ux 11.31
ssh -v #06/16/15 9:38AM#
OpenSSH_6.2p1+sftpfilecontrol-v1.3-hpn13v12, OpenSSL 0.9.8y 5 Feb 2013
HP-UX Secure Shell-A.06.20.006, HP-UX Secure Shell version
# /opt/ssh/bin/sftp -v -v -v xxx.xxx.xx.xx
Hi,
I've been presented with this server suffering from a system memory usage so high that the installed database software can't start up. The server has 96GB of physical memory and the system is using 89GB of it after a cold boot.
I've had a look at the tuneables and there's nothing I can see that is out of order and there are no services running after a fresh boot. I've brought down maxdsiz, maxdsiz_64 & base_pagesize back to default but after a reboot, no difference.
Here's what glance shows for memory stats,
# glance
Glance 11.00.044 11:26:44 xxxxx016 ia64 Current Avg High
------------------------------------------------------------------------------------------------------------------------------------------------------
CPU Util | 1% 1% 3%
Disk Util | 0% 1% 17%
Mem Util S SUF | 95% 95% 95%
Swap Util U URR | 87% 87% 87%
------------------------------------------------------------------------------------------------------------------------------------------------------
MEMORY REPORT Users= 3
Event Current Cumulative Current Rate **bleep** Rate High Rate
--------------------------------------------------------------------------------
Page Faults 120 1910 80.0 67.0 682.8
Page In 38 265 25.3 9.2 130.0
Page Out 0 0 0.0 0.0 0.0
KB Paged In 8kb 1.0mb 5.3 37.1 3154.0
KB Paged Out 0kb 0kb 0.0 0.0 0.0
Reactivations 0 0 0.0 0.0 0.0
Deactivations 0 0 0.0 0.0 0.0
KB Deactivated 0kb 0kb 0.0 0.0 0.0
VM Reads 0 0 0.0 0.0 0.0
VM Writes 0 0 0.0 0.0 0.0
Total VM : 1.7gb Sys Mem : 89.6gb User Mem: 1.3gb Phys Mem : 96.0gb
Active VM: 1.1gb Buf Cache: 0mb Free Mem: 5.0gb FileCache: 935mb
MemFS Blk Cnt: 0 MemFS Swp Cnt: 0... and swapinfo-tam
Mb Mb Mb PCT START/ Mb TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME dev 8192 0 8192 0% 0 - 1 /dev/vg00/lvol2 reserve - 1511 -1511 memory 93472 86667 6805 93% total 101664 88178 13486 87% - 0 -
... and the top ten processes by mem usage
# UNIX95=1 ps -e -o vsz,pid,ppid,args | sort -rn | head -10 238016 19659 1 /opt/perf/bin/scopeux 233212 19748 1 /opt/perf/bin/perfd 231672 19689 1 /opt/perf/bin/midaemon 217960 4784 4776 /opt/wbem/lbin/cimprovagt 0 4 9 root SFMProviderModule 199036 19703 19696 /opt/OV/lbin/perf/coda 117268 19893 19696 /opt/OV/lbin/agtrep/agtrep -start 97932 19862 19696 /opt/OV/lbin/eaagt/opcmona 91172 4777 4776 cimservermain --executor-socket 4 89528 4803 4776 /opt/wbem/lbin/cimprovagt 0 4 9 root HPUXStorageNativeProviderModule 85636 4800 4776 /opt/wbem/lbin/cimprovagt 0 4 9 root HPUXFCNativeIndicationProviderModule
... and the output of kcusage
# kcusage Tunable Usage / Setting ============================================= filecache_max 109944832 / 4900631961 maxdsiz 97189888 / 2147483647 maxdsiz_64bit 50593792 / 34359738368 maxfiles_lim 111 / 63488 maxssiz 1064960 / 134217728 maxssiz_64bit 131072 / 1073741824 maxtsiz 9797632 / 1073741824 maxtsiz_64bit 6119424 / 8589934592 maxuprc 19 / 27000 max_thread_proc 101 / 3001 msgmbs 0 / 8 msgmni 9 / 30000 msgtql 0 / 30000 nflocks 43 / 60000 ninode 1318 / 165888 nkthread 906 / 250000 nproc 264 / 30000 npty 0 / 200 nstrpty 3 / 200 nstrtel 0 / 60 nswapdev 1 / 32 nswapfs 0 / 32 semmni 45 / 32767 semmns 167 / 120000 shmmax 199163840 / 4398046511104 shmmni 23 / 30000 shmseg 2 / 512
I'm stumped as to why the system is using so much memory, any ideas/tips?
Thanks
Vin
I use sudo from iexpress depot.
When i run sudo as user or root,it takes 20-30 seconds for do a command!
I try truss and give me a lot of "gettimeofday"
like this.
send(7, "1e J01\0\001\0\0\0\0\0\004 h p u".., 22, 0) = 22 gettimeofday(0x7fffc3c0, NULL) = 0 poll(0x7fffc3e8, 1, 5000) [sleeping] poll(0x7fffc3e8, 1, 5000) = 0 close(7) = 0 socket(AF_INET, SOCK_DGRAM, 0) = 7 connect(7, 0x4005d4c0, 16) = 0 send(7, "1e J01\0\001\0\0\0\0\0\004 h p u".., 22, 0) = 22 gettimeofday(0x7fffc3c0, NULL) = 0 poll(0x7fffc3e8, 1, 10000) [sleeping]
consider recent i remove this machine from a windows domain.
What can it be?
Hello to all!
I read all internet sites but not undestand whe botllneck on server HPUX/
Glance say to me 14:15:15 RED Global swap space is nearly full
And i have:
Disk Util F FV V |100% 81% 100%
Mem Util S SU U |100% 100% 100%
Swap Util U UR R | 96% 96% 96%
Please help me
hi all,
Looking for advice from the experts before getting the hands dirty
It looks like the HP SIM Agent is supported on both Integrity and 9000 servers (as per the doc below)
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04263984#N10117
I am mainly looking for monitoring the health of the servers - cpu status, fan status, disk status, temperature, etc. and, preferably to query via SNMP
Upon installing the HP SIM agent on these servers, is there any documentation on which MIBs are exposed? Is it possible to get the information above?
If it's not available via SNMP, are there any other HP recommended ways of getting the same information?
I have an HP rx2620 running 11.31. It had a disk failure, vg02. We have replaced the disk but its not initialized/configured yet. I cant get the server to complete boot up.
/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Volume group "/dev/vg00" is already active on this system.
Activated volume group.
Volume group "/dev/vg01" has been successfully changed.
vgchange: Warning: Couldn't attach to the volume group physical volume "/dev/dsk/c3t2d0":
The path of the physical volume refers to a device that does not
exist, or is not configured into the kernel.
vgchange: Couldn't activate volume group "/dev/vg02":
Quorum not present, or some physical volume(s) are missing.
vgchange: Warning: couldn't query physical volume "/dev/dsk/c3t2d0":
The volume group is not activated
vgchange: Warning: couldn't query the list of physical volumes.
Checking vxfs file systems
UX:vxfs fsck: INFO: V-3-20913: /dev/vg00/lvol3:sanity check: root file system OK (mounted read/write)
UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol4:sanity check: /dev/vg00/lvol4 OK
UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol5:sanity check: /dev/vg00/lvol5 OK
UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol6:sanity check: /dev/vg00/lvol6 OK
UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol7:sanity check: /dev/vg00/lvol7 OK
UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol8:sanity check: /dev/vg00/lvol8 OK
UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol9:sanity check: /dev/vg00/lvol9 OK
UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol10:sanity check: /dev/vg00/lvol10 OK
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/mqcode:sanity check: /dev/vg00/mqcode needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg01/oradata01:sanity check: /dev/vg01/oradata01 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg01/oradata02:sanity check: /dev/vg01/oradata02 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg01/oralogs01:sanity check: /dev/vg01/oralogs01 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg01/oralogs02:sanity check: /dev/vg01/oralogs02 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg01/oraundo:sanity check: /dev/vg01/oraundo needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg01/oratmp:sanity check: /dev/vg01/oratmp needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg01/oraexp:sanity check: /dev/vg01/oraexp needs checking
UX:vxfs fsck: ERROR: V-3-25742: /dev/vg02/gexhome:sanity check failed: cannot open /dev/vg02/gexhome: No such device or address
UX:vxfs fsck: ERROR: V-3-25742: /dev/vg02/gexvar:sanity check failed: cannot open /dev/vg02/gexvar: No such device or address
UX:vxfs fsck: ERROR: V-3-25742: /dev/vg02/gexcurrent:sanity check failed: cannot open /dev/vg02/gexcurrent: No such device or address
UX:vxfs fsck: ERROR: V-3-25742: /dev/vg02/gexarchive:sanity check failed: cannot open /dev/vg02/gexarchive: No such device or address
UX:vxfs fsck: ERROR: V-3-25742: /dev/vg02/gextmp:sanity check failed: cannot open /dev/vg02/gextmp: No such device or address
UX:vxfs fsck: ERROR: V-3-25742: /dev/vg02/gexrelease:sanity check failed: cannot open /dev/vg02/gexrelease: No such device or address
Boot up is hanging here:
Configuring HPVM AVIO Mass Storage interfaces ..................... OK
Start Trivial File Transfer Protocol daemon in standalone mode .... N/A
Configuring HP Fibre Channel FCD Mass Storage interfaces .......... OK
Configuring HP Fibre Channel FCLP Mass Storage interfaces ......... OK
Configuring HP Fibre Channel FCOC Mass Storage interfaces ......... OK
Configuring HP Fibre Channel FCQ Mass Storage interfaces .......... OK
Starting Sophos Anti-Virus daemon ................................. OK
Starting Sophos Management Agent .................................. OK
Start NFS server subsystem ........................................ N/A
..................................................................
