Hi

I have a system running hp-ux 11.31 that the following subdirectory is filling /var filsystem:

/var/adm/sw/save

So I have run the follwing command:

cleanup -p -c 1
### Cleanup program started at 01/02/18  16:06:42
Preview mode enabled. No modifications will be made.
Commit patches superseded at least 1 time(s) on 'dbnode0'.
Obtaining superseded patch information...done.

The following patches superseded at least 1 time(s) can be committed:

Superseded  # Times Superseded  Disk Space in /var/adm/sw/save  Superseded By
==========  ==================  ==============================  =============
PHCO_36126           1                    24576 bytes             PHCO_40087
PHCO_36481           1                   163840 bytes             PHCO_39367
PHCO_36525           1                   360448 bytes             PHCO_38608
PHCO_36539           1                   393216 bytes             PHCO_39042
PHCO_36841           1                        0 bytes             PHCO_40110
PHCO_37027           1                   434176 bytes             PHCO_39862
PHCO_37252           1                   540672 bytes             PHCO_38586
PHCO_37286           1                  2097152 bytes             PHCO_40123

PHSS_38157           1                 11321344 bytes             PHSS_40832
PHSS_38527           2                  5734400 bytes             PHSS_41099
PHSS_38568           2                  1441792 bytes             PHSS_39766
PHSS_39094           2                 57614336 bytes             PHSS_41492
PHSS_39100           1                  9560064 bytes             PHSS_41181
PHSS_39102           1                  1163264 bytes             PHSS_41496
PHSS_39122           1                 38797312 bytes             PHSS_40201
PHSS_39766           1                  9543680 bytes             PHSS_41775
PHSS_39876           1                 39895040 bytes             PHSS_41259
PHSS_41099           1                 10158080 bytes             PHSS_41423
PHSS_41492           1                 83910656 bytes             PHSS_42040

All information has been logged to /var/adm/cleanup.log.
### Cleanup program completed at 01/02/18  16:06:42

And that I run the :

 #tail /var/adm/cleanup.log
PHSS_39102           1                  1163264 bytes             PHSS_41496
PHSS_39122           1                 38797312 bytes             PHSS_40201
PHSS_39766           1                  9543680 bytes             PHSS_41775
PHSS_39876           1                 39895040 bytes             PHSS_41259
PHSS_41099           1                 10158080 bytes             PHSS_41423
PHSS_41492           1                 83910656 bytes             PHSS_42040

All information has been logged to /var/adm/cleanup.log.
### Cleanup program completed at 01/02/18  16:06:42

And now too sure if for example pacth PHSS_41496 is a replacement for old PHSS_39102.

If so how can I clean single patch of if its ok to clean/remove all superseeded patchs?

Our customer have two hp rx6600 servers received log many times. May experts can advise what's the problem root cause and how to do needed actions if it is necessary? Many tahnks for your kind suport!

Notification Time: Fri Nov 10 17:15:07 2017

taopdmw1 sent Event Monitor notification information:

/adapters/events/ql_adapter/0_5_1_0 is >= 3.
Its current value is CRITICAL(5).



Event data from monitor:

Event Time..........: Fri Nov 10 17:15:07 2017
Severity............: CRITICAL
Monitor.............: dm_ql_adapter
Event #.............: 59
System..............: xxx
 
Summary:
    Adapter at hardware path 0/5/1/0 : Target device is back. Port World-wide
    name remains the same as original.



Description of Error:


lbolt value: 347928015

  Target with device id 0x10300 is back in the Name Server GPN_FT (FCP type)
  response. And the 'Port World-wide name' remains the same as original.
         device id = loop id, for private loop devices
         device id = nport ID, for fabric/public-loop devices


Probable Cause / Recommended Action:

    This is a paired message with "Target device is lost in the
    Name Server GPN_FT response".
    On receiving another RSCN, driver sent Name Server GPN_FT request
    to obtain all the FC-4 type device information in the fabric.
    Driver has detected that a previously lost device (Nport_id)
    is back in the GPN_FT response, or it's corresponding World-Wide
    Name remains the same.

    Driver will be able to communicate with the device.
    No action is needed.


Additional Event Data:
    System IP Address...: 10.x.x.x
     Event Id............: 0x5a056e1b00000003
    Monitor Version.....: B.02.00
    Event Class.........: I/O
    Client Configuration File...........:
    /var/stm/config/tools/monitor/default_dm_ql_adapter.clcfg
    Client Configuration File Version...: A.04.00
         Qualification criteria met.
              Number of events..: 1
    Associated OS error log entry id(s):
         0x5a056e1b00000001
    Additional System Data:
         System Model Number.............: ia64 hp server rx6600
         OS Version......................: B.11.23
         EMS Version.....................: A.04.20
         STM Version.....................: C.64.00
    Latest information on this event:
         http://docs.hp.com/hpux/content/hardware/ems/dm_ql_adapter.htm#59

v-v-v-v-v-v-v-v-v-v-v-v-v    D  E  T  A  I  L  S    v-v-v-v-v-v-v-v-v-v-v-v-v



Component Data:
   Physical Device Path....: 0/5/1/0

I/O Log Event Data:

    Driver Status Code..................: 0x0000003B
    Length of Logged Hardware Status....: 0 bytes.
    Offset to Logged Manager Information: 0 bytes.
    Length of Logged Manager Information: 66 bytes.

Manager-Specific Information:

Raw data from FCMS Adapter driver:
00000001 14BCF5CF 00000001 00000001 00010300 2F75782F 636F7265 2F697375
2F464344 2F6B6572 6E2F7372 632F636F 6D6D6F6E 2F777369 6F2F6663 645F646D
2E63

Hello Team,

Can any one help me out to enable the passive ftp in HP-UX 11.31 and need to set the random ports in the FTP configuration file ,where the client need to access the ftp via the ports. Please provide the step by step procedure.

Thanks in advance..

Cheers...

Simbu

Hi,

We have a HP-UX 11.11 ( 10.61.X.X  ) machine which was recently migrated from one location to another.

There is a packet loss between the Unix server and one windows machine in the same subnet ( 10.61.X.X )

The ping has a delay of exactly 20 seconds.

# ping gsauXXXXX
PING gsauXXXXX: 64 byte packets
64 bytes from 10.61.x.X: icmp_seq=0. time=0. ms
64 bytes from 10.61.x.X: icmp_seq=58. time=0. ms
64 bytes from 10.61.x.X: icmp_seq=78. time=0. ms
64 bytes from 10.61.x.X: icmp_seq=161. time=0. ms
64 bytes from 10.61.x.X: icmp_seq=181. time=0. ms

The windows box is present in the Unix server's host file

There is only one NIC on the HP-UX server.

I have tried removing all the entries in the resolv.conf and manually add a songle name server but no luck.

The ping sometimes works fine when we stop start the network /sbin/init.de/net start

Can someone point me in the right direction.

lanadmin -g output :

LAN INTERFACE STATUS DISPLAY
Tue , Jan 9,2018 21:27:56

PPA Number = 0
Description = lan0 HP PCI 1000Base-T Release B.11.11.15
Type (value) = ethernet-csmacd(6)
MTU Size = 1500
Speed = 1000000000
Station Address = 0xXXXX
Administration Status (value) = up(1)
Operation Status (value) = up(1)
Last Change = 2869
Inbound Octets = 1404468091
Inbound Unicast Packets = 912069368
Inbound Non-Unicast Packets = 10098528
Inbound Discards = 0
Inbound Errors = 0
Inbound Unknown Protocols = 3385
Outbound Octets = 2314685677
Outbound Unicast Packets = 852506077
Outbound Non-Unicast Packets = 68876
Outbound Discards = 0
Outbound Errors = 0
Outbound Queue Length = 0
Specific = 655367

Ethernet-like Statistics Group

Index = 1
Alignment Errors = 0
FCS Errors = 0
Single Collision Frames = 0
Multiple Collision Frames = 0
Deferred Transmissions = 0
Late Collisions = 0
Excessive Collisions = 0
Internal MAC Transmit Errors = 0
Carrier Sense Errors = 0
Frames Too Long = 0
Internal MAC Receive Errors = 0

# cat /etc/nsswitch.conf
#
# /etc/nsswitch.files:
#
# @(#)B.11.11_LR
#
# An example file that could be copied over to /etc/nsswitch.conf; it
# does not use any name services.
#
passwd: files winbind ldap
group: files winbind ldap
#passwd: files
#group: files ldap
hosts: files dns ldap
services: files ldap
networks: files ldap
protocols: files ldap
rpc: files ldap
publickey: files
netgroup: files ldap
automount: files
aliases: files

HP-UX B.11.31 U ia64 0647988385 unlimited-user license

Platform info:
Model: "ia64 hp Integrity BL870c i2"

OS info:
Release: HP-UX B.11.31
Version: U (unlimited-user license)
Machine: ia64
ID Number: 0647988385
vmunix _release_version:
@(#) $Revision: vmunix: B.11.31_LR FLAVOR=perf

# cat /etc/rc.config.d/sshd
# SSHD_START: Set to 1 to start SSH daemon
# SSHD_ARGS: Command line arguments to pass to sshd
#
SSHD_START=1
SSHD_ARGS=
SSHD_UMASK=022 #The acceptable values of this variable are found by doing man umask
# /sbin/init.d/secsh stop
#
# sh -x /sbin/init.d/secsh start
+ PATH=/usr/sbin:/usr/bin:/sbin
+ export PATH
+ WHAT=HP-UX Secure Shell
+ WHAT_PATH=/opt/ssh/sbin/sshd
+ + awk {print $2}
+ grep -i ^pidfile /opt/ssh/etc/sshd_config
WHAT_PID=
+ [ = ]
+ WHAT_PID=/var/run/sshd.pid
+ WHAT_CONFIG=/etc/rc.config.d/sshd
+ rval=0
+ SRPPS=/opt/hpsrp/bin/srp_ps
+ [ -f /opt/hpsrp/bin/srp_ps ]
+ myps=ps
+ [ -f /etc/rc.config.d/sshd ]
+ . /etc/rc.config.d/sshd
+ SSHD_START=1
+ SSHD_ARGS=
+ SSHD_UMASK=022
+ umask 022
+ ps -ef
+ grep -v grep
+ grep /opt/ssh/sbin/sshd
+ 1> /dev/null
+ NOT_RUNNING=1
+ [ 1 -eq 1 -a -x /opt/ssh/sbin/sshd -a 1 -eq 1 ]
+ rval=2
+ exit 2
#
# swlist |grep -i Secure*
HPUXBastille B.3.3 Bastille Security Hardening Tool
Secure_Shell A.06.20.030 HP-UX Secure Shell
#
# which ssh
no ssh in /usr/sbin /usr/bin /usr/ccs/bin /usr/contrib/bin /usr/contrib/Q4/bin /opt/perl/bin /opt/gvsd/bin /opt/ipf/bin /opt/nettladm/bin /opt/fcms/bin /opt/wbem/bin /opt/wbem/sbin /opt/sas/bin /opt/graphics/common/bin /opt/atok/bin /usr/bin/X11 /usr/contrib/bin/X11 /opt/sec_mgmt/bastille/bin /opt/caliper/bin /opt/drd/bin /opt/dsau/bin /opt/dsau/sbin /opt/resmon/bin /opt/firefox /opt/gnome/bin /opt/perf/bin /opt/propplus/bin /usr/contrib/kwdb/bin /opt/perl_32/bin /opt/perl_64/bin /opt/prm/bin /opt/sfm/bin /opt/swm/bin /opt/sec_mgmt/spc/bin /opt/swa/bin /opt/hpsmh/bin /opt/thunderbird /opt/sentinel/bin /opt/langtools/bin /opt/wlm/bin /opt/gwlm/bin /opt/ssh/bin /sbin /home/root
#
# ssh -V
sh: ssh: not found.
#

Hello Team,

I configured SFTP in hp-ux and also set chroot directory in the sshd_config file.I am able to connect SFTP server using winscp and filezilla and able to seen my present directory.could you please help me out to block the / remaining folders that won't able to access by the SFTP user.

This is my current config of SFTP

#Subsystem       sftp    internal-sftp
#Match User sftppipaa
#ChrootDirectory /usr/sap/
#ForceCommand internal-sftp
#AllowTcpForwarding no

Thanks in Advance.

Regards,

Simbu

Hi, 

Storage to storage migration is done all volumes are synced, now we want to disconnect volume from old san and present volume from new san (data already copied). What is the best solution to mount new san volume at HPUX? plz advise.

# machinfo
CPU info:
4 Intel(R) Itanium(R) Processor 9340s (1.6 GHz, 20 MB)
4.79 GT/s QPI, CPU version E0
16 logical processors (4 per socket)

Memory: 147280 MB (143.83 GB)

Firmware info:
Firmware revision: 01.98
FP SWA driver revision: 1.18
IPMI is supported on this system.
BMC firmware revision: 1.59

Platform info:
Model: "ia64 hp Integrity BL870c i2"

OS info:
Release: HP-UX B.11.31
Version: U (unlimited-user license)
Machine: ia64
ID Number: 0647988385
vmunix _release_version:
@(#) $Revision: vmunix: B.11.31_LR FLAVOR=perf

# ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
disk 0 0/0/0/2/0/0/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d0 /dev/dsk/c0t0d0s2 /dev/rdsk/c0t0d0 /dev/rdsk/c0t0d0s2
/dev/dsk/c0t0d0s1 /dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s1 /dev/rdsk/c0t0d0s3
disk 2 255/1/0.0.0 sdisk CLAIMED DEVICE HP Virtual DVD-ROM
/dev/dsk/c2t0d0 /dev/rdsk/c2t0d0

# mount -F cdfs -e -o ro,rr /dev/dsk/c2t0d0 /dvdrom
/dev/dsk/c2t0d0: unrecognized file system

Has anyone seen any clarification of HP's response to Spectre and Meltdown for legacy rx (2600, 2800) and 9000 rp (2470, 3440, 8420) systems?

Hi All,

Need help in logging in tsmacct user for client server (hpux 11.31) in AIX TSM server. What I'm trying to do is to log into hpux server in TSM server using tsmacct account created in hpux server but it is not working. But when I try to do a direct root log in TSM server going to my hpux client server it's working.

AIX server # uname -a
AIX bcv50s1c 3 5 0003B058D700

direct root log in from TSM server to HPUX client server:

bcv50s1c:/ # ssh fr70vhvmh002
Last successful login: Wed Jan 17 09:58:44 MET 2018 bcv50s1c.dc-m.alcatel-lucent.com
Last authentication failure: Wed Jan 3 14:07:05 MET 2018 frmrs081.dc-m.alcatel-lucent.com
Last login: Wed Jan 17 09:58:45 2018 from bcv50s1c.dc-m.alcatel-lucent.com
###########################################################################

Value of TERM has been set to "xterm".
WARNING: YOU ARE SUPERUSER !!

fr70vhvmh002#

tsmacct user log in from TSM server to HPUX client server:

# ssh tsmacct@fr70vhvmh002
Connection closed by 135.120.64.50

# ssh -vvv tsmacct@fr70vhvmh002
OpenSSH_4.1p1, OpenSSL 0.9.7d 17 Mar 2004
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Failed dlopen: /usr/krb5/lib/libkrb5.a(libkrb5.a.so): Could not load module /usr/krb5/lib/libkrb5.a(libkrb5.a.so).
System error: No such file or directory

debug1: Error loading Kerberos, disabling Kerberos auth.
debug2: ssh_connect: needpriv 0
debug1: Connecting to fr70vhvmh002 [135.120.64.50] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /.ssh/identity type -1
debug3: Not a RSA1 key file /.ssh/id_rsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /.ssh/id_rsa type 1
debug3: Not a RSA1 key file /.ssh/id_dsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /.ssh/id_dsa type 2
debug1: Remote protocol version 1.99, remote software version OpenSSH_7.3p1+sftpfilecontrol-v1.3-hpn14v11
debug1: match: OpenSSH_7.3p1+sftpfilecontrol-v1.3-hpn14v11 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.1
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1
debug2: kex_parse_kexinit: ssh-rsa,rsa-sha2-512,rsa-sha2-256,ecdsa-sha2-nistp256,ssh-ed25519
debug2: kex_parse_kexinit: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: kex_parse_kexinit: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: kex_parse_kexinit: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: kex_parse_kexinit: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-sha1
debug1: kex: server->client aes128-ctr hmac-sha1 none
debug2: mac_init: found hmac-sha1
debug1: kex: client->server aes128-ctr hmac-sha1 none
debug2: dh_gen_key: priv key bits set: 163/320
debug2: bits set: 1014/2048
debug1: sending SSH2_MSG_KEXDH_INIT
debug1: expecting SSH2_MSG_KEXDH_REPLY
debug3: check_host_in_hostfile: filename /.ssh/known_hosts
debug3: check_host_in_hostfile: match line 4242
debug3: check_host_in_hostfile: filename /.ssh/known_hosts
debug3: check_host_in_hostfile: match line 4247
debug1: Host 'fr70vhvmh002' is known and matches the RSA host key.
debug1: Found key in /.ssh/known_hosts:4242
debug2: bits set: 1027/2048
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /.ssh/identity (0)
debug2: key: /.ssh/id_rsa (20055e18)
debug2: key: /.ssh/id_dsa (20055e38)
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug3: start over, passed a different list publickey,password,keyboard-interactive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /.ssh/identity
debug3: no such identity: /.ssh/identity
debug1: Offering public key: /.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-rsa blen 149
debug2: input_userauth_pk_ok: fp ce:da:48:4f:ac:7f:09:3b:a7:dd:29:52:be:5e:ce:90
debug3: sign_and_send_pubkey
debug1: read PEM private key done: type RSA
Connection closed by 135.120.64.50

Hi all

I installed CIFS Server Version 4.05.11 on hpux 11.31 in order to connect from am WIN 10 Version 1709, what was not working with samab 3.2.X

Now a lot of configuration parameters are unknown like "force directory mode ",..

How can i specity file and directory permissions now differing from defaut samba (create mask = 744 and directory mask = 755, am i right?) and default UNIX (666 and 777)

I need files 774 and dirs 775

When i specify this in smb.conf using only create mask and directory mask the resultion unix files are

764 (!) and directorys are 775 (= is OK)

what is wrong? Win User is using default permissions (no special umask set on HPUX)

(unix extentions = no)

When i change settings in smb.conf the results are not always the same.

A always disconnect and reconnect the windows share.

Are the permission information cashed anywhere?

thanks for help - answer on monday is early enough

regards Romy

Dear Techies,

What happened if /root file system restored when one machine to another machine..?

If any afftected in distination machine ?  If yes means what kind of troubles there?

i'm tring to compile Stunnel V5.43 in HPUX box.

I'm getting

/usr/lib/hpux32/dld.so: Unsatisfied data symbol 'rfc931_timeout' in load module '/usr/lib/hpux32/libwrap.so'.

Can some help me to fix this issue?

Thanks

Vivek

Hi All

I am trying to boot the HP-UX server in single mode boot from boot loader prompt but its stuck after executing insf commands .

From earlier output when single user mode was working fine , I could make out that its not executing the 3 INIT commands this time due to which I am not getting the prompt . I tried maintenance mode boot as well but same results

INIT: Overriding default level with level 's'

INIT: SINGLE USER MODE

INIT: Running /sbin/sh

I don't have an ignite backup or DVD . is there any way out ??

Below is the screenshot from maintenance mode boot

/sbin/ioinitrc:
UX:vxfs fsck: ERROR: V-3-20003: /dev/vg00/lvol1:Cannot open /dev/vg00/lvol1: No such device or address
/dev/vg00/lvol1:file system check failure, aborting ...
UX:vxfs mount: ERROR: V-3-20003: Cannot open /dev/vg00/lvol1: No such device or address
UX:vxfs mount: ERROR: V-3-24996: Unable to get disk layout version
Unable to mount /stand - please check entries in /etc/fstab
Skipping KRS database initialization - /stand can't be mounted

Starting EMC PowerPath.
/dev/emcp: No such device
Starting EMC PowerPath Failed

Its stuck at this point .

Hello

Can you please help to start Hp server. Or to understand the root of the problem.

The log is the next:

Firmware Version  46.34

Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
   (c) Copyright 1995-2004, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------

  Processor   Speed            State           CoProcessor State  Cache Size
  Number                                       State              Inst    Data
  ---------  --------   ---------------------  -----------------  ------------
      0     1000  MHz   Active                 Functional         67108864 67108864
      1     1000  MHz   Idle                   Functional         67108864 67108864
      2     1000  MHz   Idle                   Functional         67108864 67108864
      3     1000  MHz   Idle                   Functional         67108864 67108864

  Central Bus Speed (in MHz)  :        200  
  Available Memory            :   16777212  KB
  Good Memory Required        : Not initialized. Defaults to 32 MB.

   Primary boot path:    0/1/1/0.0           
   Alternate boot path:  0/1/1/0.1           
   Console path:         0/7/1/1.0           
   Keyboard path:        0/0/4/0.0           


Processor is booting from the first available device.

To discontinue, press any key within 10 seconds.

10 seconds expired.
Proceeding...

Trying Primary Boot Path
------------------------
Booting...
Boot IO Dependent Code (IODC) revision 1


HARD Booted.

ISL Revision A.00.43  Apr 12, 2000

ISL booting  hpux -lq

Boot
: disk(0/1/1/0.0.0.0.0.0.0;0)/stand/vmunix
12136448 + 2310144 + 1777368 start 0x1fff68




alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3f901000.



Firmware Version  46.34

Duplex Console IO Dependent Code (IODC) revision 1



Stored message buffer up to panic:
:  SCRATCHF:    00078000
     70:  SCRATCHG:    00000001
     74:  SCRATCHH:    0007d600
     78:  SCRATCHI:    00000000
     7c:  SCRATCHJ:    00000000
     bc:  SCNTL4:    00
    PCI configuration register dump:
                Command: 0157
          Latency Timer: c0
        Cache Line Size: 20

SCSI: Resetting SCSI -- lbolt: 6346, bus: 3 path: 0/1/1/1

SCSI: Reset detected -- lbolt: 6346, bus: 3 path: 0/1/1/1
SCSI: Ultra160 Controller at 0/1/1/1: Error: The domain validation test for target 1 determined that communication may not be possible to this target. Verify the hardware configuration.
SCSI Gross Error on 0/1/1/1:
shadowed SIST0 80 shadowed SIST1 00.
SCSI: isrEscape Controller at 0/1/1/1.

SCSI:  -- lbolt: 6646, bus: 3
        lbp->state: 30008
        lbp->offset: ffffffff
        lbp->nominalOffset: 360
        lbp->Cmdindex: 1
        lbp->last_nexus_index: 0
        lbp->nexus_index: 0
        uCmdSent: 0 uNexus_offset: 0
     last lbp->puStatus [000000004c235600]:
        00000000 00000000 00000000 00000000
     next lbp->puStatus [000000004c2357f0]:
        00000000 00000000 00000000 00000000
    From most recent interrupt:
        ISTAT: 22, SIST0: 08, SIST1: 00, DSTAT: 80, DSPS: 00000000
    lsp: 0x0000000000000000
        DSAtbl->host_iocb_index: 1
        DSAtbl->host_iocb_addr: 7d800
    scratch_lsp: 0x0000000000000000
    c8xx_iocb [ffffffff90010b00]:
        00000000 00000000 00000000 00000000
        00000000 00000000 00000000 00000000
    Pre-DSP script dump [ffffffff90010340]:
        745c0200 00000000 888c0000 fffffd48
        88880000 fffffca8 48000000 00000000
    Script dump [ffffffff90010360]:
        7c5cf000 00000000 7c360000 00000000
        745c3000 00000000 808c2010 fffffe30
    NCR chip register dump for: 0x400200a
     00:  SCNTL3:    77    SCNTL2:    00    SCNTL1:    00    SCNTL0:    ca
     04:  GPREG:    0f    SDID:    00    SXFER:    00    SCID:    47
     08:  SBCL:    00    SSID:    00    SOCL:    00    SFBR:    00
     0c:  SSTAT2:    02    SSTAT1:    00    SSTAT0:    00    DSTAT:    80
     10:  DSA:    90010b00
     14:  MBOX1:    00    MBOX0:    00    ISTAT1:    00    ISTAT:    22
     1c:  TEMP:    00000000
     24:  DCMDDBC:    7c5cf000
     28:  DNAD:    90010360
     2c:  DSP:    90010368
     30:  DSPS:    00000000
     34:  SCRATCHA:    ff000000
     38:  DCNTL:    a1    DWT:    00    DIEN:    7f    DMODE:    4c
     3c:  ADDER:    90010368
     40:  SIST1:    00    SIST0:    08    SIEN1:    97    SIEN0:    8f
     44:  GPCNTL:    2f    MACNTL:    00    SWIDE:    03    SLPAR:    00
     48:  RESPID1:    00    RESPID0:    80    STIME1:    00    STIME0:    fc
     4c:  STEST3:    80    STEST2:    00    STEST1:    0c    STEST0:    07
     50:  RESV50:    00    RESV51:    c0    SIDL1:    fe    SIDL0:    fe
     54:  CCNTL1:    01    CCNTL0:    01    SODL1:    00    SODL0:    00
     58:  RESV58:    00    RESV59:    00    SBDL1:    00    SBDL0:    00
     5c:  SCRATCHB:    00000000
     60:  SCRATCHC:    c0ffffff
     64:  SCRATCHD:    00000000
     68:  SCRATCHE:    90010c00
     6c:  SCRATCHF:    00078000
     70:  SCRATCHG:    00000001
     74:  SCRATCHH:    0007d600
     78:  SCRATCHI:    00000000
     7c:  SCRATCHJ:    00000000
     bc:  SCNTL4:    00
    PCI configuration register dump:
                Command: 0157
          Latency Timer: c0
        Cache Line Size: 20

SCSI: Resetting SCSI -- lbolt: 6746, bus: 3 path: 0/1/1/1

SCSI: Reset detected -- lbolt: 6746, bus: 3 path: 0/1/1/1
SCSI: Ultra160 Controller at 0/1/1/1: Error: The domain validation test for target 1 determined that communication may not be possible to this target. Verify the hardware configuration.
SCSI Gross Error on 0/1/1/1:
shadowed SIST0 80 shadowed SIST1 00.
SCSI: isrEscape Controller at 0/1/1/1.

SCSI:  -- lbolt: 7046, bus: 3
        lbp->state: 30008
        lbp->offset: ffffffff
        lbp->nominalOffset: 360
        lbp->Cmdindex: 1
        lbp->last_nexus_index: 0
        lbp->nexus_index: 0
        uCmdSent: 0 uNexus_of...

System Panic:

linkstamp:          Thu Feb 18 13:57:17 EST 2010
_release_version:   @(#)       $Revision: vmunix:    vw: -proj    selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108'  Wed Nov  8 19:24:56 PST 2000 $
panic: I/O system hang

PC-Offset Stack Trace (read across, top of stack is 1st):
  0x002128d8  0x00391ab4  0x00a2d174
  0x00040ca8  0x002677b0  0x0016a32c
  0x0017c804  0x0017a15c
End Of Stack



*** A system crash has occurred.  (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

ERROR:  Your system crashed before I/O and dump configuration was complete.
        A crash dump cannot be taken under these circumstances without
        special configuration.  Contact your HP support representative.

Could someone please direct me where download HPUX Quality Pack Bundles?

I have a full HPUX account and have worked with HPUX but I am still having problems.

Most of the problems are with the website and it be so very unrepsonsive.  I have a full SAID and Contract - I have been working with HPUX and have a ticket but it is beocme very much like pulling a tooth and finding it is the wrong one.

Any help is wlecome and very much need.  In today's cilmate of keeping system secure this is my top prioirty.

The partiuclar QPK I am trying to get is - QPK1131_B.11.31.1709.431.depot

I can download individuals patch from this link below - but I cannot find or get to QPKs even with an HP techs help --  https://support.hpe.com/portal/site/hpsc/template.PAGE/patch/content/?javax.portlet.tpst=002cb58b290ddaae36d77910b053ce01&javax.portlet.pbp_002cb58b290ddaae36d77910b053ce01=dispPage%3DViewCartResult%26dispGlossary%3Dtrue%26dispSel%3D%257Bhpux%253A11.31%252C%257D%26dispId%3D&javax.portlet.prp_002cb58b290ddaae36d77910b053ce01=wsrp-navigationalState%3DdispPage%25253DViewCartResult%25257CdispGlossary%25253Dtrue%25257CdispSel%25253D%25257Bhpux%25253A11.31%25252C%25257D%25257Caction%25253DviewCart%25257CdispId%25253D%25257Cbc%25253DbrContent.release%25257B%25257Bhpux%25252C%25257D%25257D%252540content.release%25257B%25257Bhpux%25253A11.31%25252C%25257D%25252C1709-11.31%25257D%252540content.depot%25257B%25257Bhpux%25253A11.31%25252C%25257D%25252CQPK1131%25253AB.11.31.1709.431%25257D%25257Csel%25253D%25257Bhpux%25253A11.31%25252C%25257D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

Thanks so much, Lee 

Hi all

When i start reboot my server the time of bootup it gives  fail states related to HP RAID SA

Configure HP RAID SA interfaces...............FAIL*

Does any have the correct URL for BigFix to downlaod patches using prefetch?

This is the prefetch and URL that BigFix  is using - it failes - see error below:

prefetch QPK1131_B.11.31.1709.431.depot sha1:77d7b20ea6c8cd9f1d320c60e4f689feeb8a27b8 size:2371706880 "
HPUXProtocol://www.hp.com/09.17/11.31/QPK1131/B.11.31.1709.431/QPK1131_B.11.31.1709.431.depot "  sha256:1806134a09835a7915b04eb838d62e9eb48f6ce69324e47651615bb3532aabfb

wait swinstall -x autoreboot=true -x patch_match_target=true -s "{(client folder of current site as string) & "/__Download/QPK1131_B.11.31.1709.431.depot"}"

Error: Oops!

We can't find that page, but here's the good news - we've got other ways to find what you need

Thanks, Lee

I'm working on a brand new 11.31 system that needs to do network printing.

I have 'printcfg' install:

swlist|grep -i printers
PrintCfg B.11.31.07 HP-UX Printers and Plotters Configuration Tool Bundle

When I run 'lpweb' and go to 'add printer' I get:

Printer Management->Add printer

Spooler : RUNNING System Default : NOT DEFINED
------------------------------------------------------------------------------------------------------------------------------------
Add RS-232 printer/plotter

When i run 'smh' and select 'p' (not 'l' (ell))...and drill down to where I am lead to believe that I can install a network printer:

Add Network-Based Printer/Plotter -> │ Add Printer/Plotter Connected to HP JetDirect...

This error pops up:

The HP JetDirect printer software is not installed on your system
(neither the command "/opt/hpnpl/admin/hppi", nor the command
"/opt/hpnp/admin/jetadmin", exists). Therefore, it is not possible
to add a printer that is connected to an HP JetDirect interface.

Checking the software depot, there's nothing (obvious?) for another/additional software package (like the old JetDirect one).

Help?

Hi, i´m trying to uncompress a file. When i run the command "tar xvf hpux-11.16.002.tar" and "tar xvf hpux-11.16.002.tar.gz", in both case the result was:

x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/TRU64/Tru64_Alpha/OvOWNPRegConfig.dtd, 2924 bytes, 6 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/TRU64/Tru64_Alpha/subagent_config.xml, 452 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/TRU64/Tru64_Alpha/OvOWNPRegConfig_PA.dtd, 2924 bytes, 6 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/TRU64/Tru64_Alpha/agent_config.xml, 916 bytes, 2 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/AIX/AIX_powerpc32/OvOWNPRegConfig.dtd, 2400 bytes, 5 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/AIX/AIX_powerpc32/subagent_config.xml, 452 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/AIX/AIX_powerpc32/OvOWNPRegConfig_PA.dtd, 2924 bytes, 6 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/AIX/AIX_powerpc32/agent_config.xml, 56324 bytes, 111 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/WIN/Windows_IA64/OvOWNPRegConfig.dtd, 2400 bytes, 5 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/WIN/Windows_IA64/subagent_config.xml, 456 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/WIN/Windows_IA64/OvOWNPRegConfig_PA.dtd, 2924 bytes, 6 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/WIN/Windows_IA64/agent_config.xml, 6234 bytes, 13 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/LIN/Linux2.4_X86/OvOWNPRegConfig.dtd, 2924 bytes, 6 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/LIN/Linux2.4_X86/subagent_config.xml, 454 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/LIN/Linux2.4_X86/OvOWNPRegConfig_PA.dtd, 2924 bytes, 6 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/LIN/Linux2.4_X86/agent_config.xml, 448 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/LIN/Linux2.6_IA64/OvOWNPRegConfig.dtd, 2400 bytes, 5 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/LIN/Linux2.6_IA64/subagent_config.xml, 454 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/LIN/Linux2.6_IA64/OvOWNPRegConfig_PA.dtd, 2924 bytes, 6 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/obsconfig/LIN/Linux2.6_IA64/agent_config.xml, 9844 bytes, 20 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/HPOvPerlA.rpm, 9241223 bytes, 18050 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/HPOvPerlA.sparc, 33478144 bytes, 65387 tape blocks
x ././@LongLink, 108 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Alarmdef file for AIX_8B12CD74-B13D-48E3-AB5A-06583, 0 bytes, 0 tape blocks
x ././@LongLink, 106 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Parm file for SunOS_7D0FA424-63DB-4876-BB75-64321C0, 19968 bytes, 39 tape blocks
x ././@LongLink, 103 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/OVOSelfMonTstAll_10B5A9AE-9F67-412F-966E-68D0AA165E, 3584 bytes, 7 tape blocks
x ././@LongLink, 111 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Alarmdef file for VMWare_C6E1198E-E5BB-4DEE-82B9-C3, 12288 bytes, 24 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/sunos.alarmdef, 13740 bytes, 27 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/vmware.parm, 15095 bytes, 30 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/win.alarmdef, 7833 bytes, 16 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/aix.alarmdef, 13681 bytes, 27 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/tru64.alarmdef, 7619 bytes, 15 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/linux.alarmdef, 13422 bytes, 27 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/win.parm, 12175 bytes, 24 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/linux.parm, 15109 bytes, 30 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/hpux.alarmdef, 14456 bytes, 29 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/tru64.parm, 10861 bytes, 22 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/hpux.parm, 14076 bytes, 28 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/aix.parm, 15706 bytes, 31 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/vmware.alarmdef, 13423 bytes, 27 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/templates/sunos.parm, 16272 bytes, 32 tape blocks
x ././@LongLink, 105 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/OVOSelfMonTstTrapi_CDD0A776-9E54-479C-B906-A464DBA7, 4096 bytes, 8 tape blocks
x ././@LongLink, 107 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Parm file for VMWare_318FD63F-929B-4511-AF55-FC3C27, 9728 bytes, 19 tape blocks
x ././@LongLink, 106 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Parm file for Linux_1FD89782-6F00-4300-8B9D-80197F4, 18432 bytes, 36 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/scripts/controlm.pl, 1268 bytes, 3 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/scripts/NewConfigPol.vbs, 28721 bytes, 57 tape blocks
x ././@LongLink, 112 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Alarmdef file for Windows_C6997FE7-15AB-4C37-97A8-8, 11264 bytes, 22 tape blocks
x ././@LongLink, 109 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/OVOSelfMonVerifyLe_DCE_246BDB5E-0D58-448C-BC4E-948B, 7168 bytes, 14 tape blocks
x ././@LongLink, 106 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Parm file for TRU64_09A0742F-85CF-42C4-9B07-2A6E814, 14336 bytes, 28 tape blocks
x ././@LongLink, 106 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Parm file for HP-UX_BFD27712-911F-47F0-ACA7-BD73BB6, 17408 bytes, 34 tape blocks
x ././@LongLink, 107 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/OVOSelfMonTstMonaExt_2F36E72D-901B-4120-AD87-CE9863, 4608 bytes, 9 tape blocks
x ././@LongLink, 104 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Parm file for AIX_C96A45F7-1A87-4607-A451-5ECF1AB14, 18432 bytes, 36 tape blocks
x ././@LongLink, 110 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Alarmdef file for SunOS_A7DAC885-996E-4BB2-BBC4-A2A, 17408 bytes, 34 tape blocks
x ././@LongLink, 106 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/OVOSelfMonVerifyMon_0247CC01-BEA2-4334-9867-C7DF2C3, 9728 bytes, 19 tape blocks
x ././@LongLink, 110 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Alarmdef file for TRU64_50ECA47F-868F-4314-925B-81F, 11264 bytes, 22 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/config.mm, 5677 bytes, 12 tape blocks
x ././@LongLink, 102 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/OVOSelfMonTstLe_39463BCD-CDD1-4F63-8B6B-D6721A23790, 4608 bytes, 9 tape blocks
x ././@LongLink, 111 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/OVOSelfMonVerifyLe_HTTPS_8C08FF4D-F92F-4877-B1AC-E4, 7168 bytes, 14 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/HPPA-opcmsg_067F521B-496D-48B9-A4C0-35339DB2883C, 4608 bytes, 9 tape blocks
x ././@LongLink, 108 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Parm file for Windows_3A7EA2D3-9D71-4FB1-B786-FC4F6, 15872 bytes, 31 tape blocks
x ././@LongLink, 110 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Alarmdef file for Linux_A09B993C-D3EC-4824-A9A4-B01, 16896 bytes, 33 tape blocks
x ././@LongLink, 104 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/OVOSelfMonTstActa_76AD0FE5-EA56-40DD-A3E4-96513D132, 3584 bytes, 7 tape blocks
x ././@LongLink, 110 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/Alarmdef file for HP-UX_F415AE75-2CBD-48F9-AA1F-E94, 17920 bytes, 35 tape blocks
x ././@LongLink, 104 bytes, 1 tape blocks
x HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/policies/OVOSelfMonTstMsgi_F3EF6F9A-9D78-4BB5-BD8B-D49BA7A74, 4096 bytes, 8 tape blocks
x ././@LongLink, 105 bytes, 1 tape blocks
x ././@LongLink, 114 bytes, 1 tape blocks
x ././@LongLink, 126 bytes, 1 tape blocks
tar: HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/SPI-Share/Performance_Collection_Component/Alarmdef_for_Wind - cannot create
x ././@LongLink, 105 bytes, 1 tape blocks
x ././@LongLink, 114 bytes, 1 tape blocks
x ././@LongLink, 122 bytes, 1 tape blocks
tar: HPUX-11.16.002/HPUX-11.14.014/misc/OMW8/SPI-Share/Performance_Collection_Component/Parmfile_for_Wind - cannot create
x ././@LongLink, 110 bytes, 1 tape blocks
x ././@LongLink, 118 bytes, 1 tape blocks
directory checksum error

I searched in the forum but i didn't found a answer to my case.

Thanks!!!